Got a Smart Card Reader (Gemalto IDBridge CT30) for really cheap, but is frankly just too large. Would be nice to shrink it.

It has usb and serial capability. But I have no idea what's the pinout for the serial line version.


PINOUT OF THE GEMALTO ID
	
	USB CABLE to smartcard reader: 
	[ 1:NC | 2:USB_D+_GREEN | 3:USB_D-_WHITE | 4:5V_VCC 
	| 5:NC  | 6:NC           | 7:NC           | 8:GND    ]
	
	 __   ___________________   __
	|  |_| [1|2|3|4|5|6|7|8] |_|  |
	|                             |
	|    ([ 4.0Mhz Crystal ])     |
	|                             |
	|   | | | | | | | | | | | |   |
	|  |-----------------------|  |
	|  |  [ST] GEMPLUS         |  |
	|  |  GEMTWIN200G          |  |
	|  |  SAZ1 9907JVP         |  |
	|  |       MYS 99644       |  |
	|  |-----------------------|  |
	|   | | | | | | | | | | | |   |
	|                             |
	|                             |
	|                             |
	|                             |
	|                             |
	|-----------------------------|
	
	
	C1:VCC C2:RST C3:CLK C4:NC
	C5:NC C6:IO C7:NC C8:VSS/GND
	 __   ___________________   __
	|  |_|                   |_|  |
	|                             |
	|                    |C D|    |
	|                    |A E|    |
	| |               |  |R T|    |
	| |               |  |D E|    |
	| |               |  |  C|    |
	| |               |  |  T|    |
	| [C1][C2][C3][C4]|           |
	|                             |
	| [C8][C7][C6][C5]|           |
	| |               |           |
	| |               |           |
	| |               |           |
	| |               |           |
	| |               |           |
	| |               |           |
	|                             |
	|-----------------------------|

Since I will be using the ID-000 smartcard form factor, I will need to short circuit the card detect function. Which doesn't matter since I will always be plugging in a single smartcard